
DrupNL
Apr 7, 07:35 AM
Hmm, nobody likey???
No...
No...
jmdeegan
May 3, 10:21 AM
Have you tried all the best buys in Manhattan ?
Search JR Electronics (They have a few stores , and even one in macys herald square i believe) ? , ask if you can use prepaid debit cards ?
J and R only has one store, per se. It's departments are sometimes in seperate buildings, but it's really just one sprawling complex. It's apple section is on the 4th floor, not a ton of stuff there, I'd argue it's on par with the Apple section @ a typical best buy. Maybe a bit more stuff, but not significantly so.
Search JR Electronics (They have a few stores , and even one in macys herald square i believe) ? , ask if you can use prepaid debit cards ?
J and R only has one store, per se. It's departments are sometimes in seperate buildings, but it's really just one sprawling complex. It's apple section is on the 4th floor, not a ton of stuff there, I'd argue it's on par with the Apple section @ a typical best buy. Maybe a bit more stuff, but not significantly so.
tekkierich
Feb 18, 10:55 AM
Hi Guys & Gals,
I'm going to make the jump to an Intel SSD this weekend to replace my stock 320GB (5400 RPM) Drive in the 2010 Mac Mini.
Those of you that have actually done this, did you find that the Logic Board really needed to be shifted at all? I've been looking at the OWC installation Video and it would seem to me that the drive will lift out over the Logic Board without moving the board at all. It would mean that I would only have to detach the first SATA and two heat connectors. The least amount of connectors I have to pull the better I would assume. Also, I'm thinking that the black vinyl covering wrapped around the 320GB drive is there to protect the moving/electrical drive components on the bottom of the drive, which I would not need on the SSD. I know that I need/should replace the piece of tape to hold the heat sensor wire on the new SSD.
Any help would be great.....:)
2010 Mac Mini (2.4MHz - 8GB RAM Intel 80GB SSD(pending)) Air Port Extreme, 2TB Mini Stack External Dive, 16GB WiFi iPad, 32GB iPhone 3GS.
I have not done an SSD per say, but I have made a little side business upgrading the hard drive on 2010 Mac Mini's and selling them on ebay. After having done 10 or so of these, yes you do need to pull the logic board out slightly. The hard drive will not lift up enough to give you the angle you need clear the logic board with out pulling it out.
That said, only pull it out enough to see a small gap of air between the black beisl in the rear and the alum case.
WRT the heat sensors... I have found that the smallest amount of rubber cement works well if you you loose the adhesive when transferring the sensor. 8/10 times you will have plenty of stick left though and wont need to add any.
The black cover I have also assumed was there for air flow as well. If the SSD has a smooth surface, and no logic board to short, you probably can do away with it.
I'm going to make the jump to an Intel SSD this weekend to replace my stock 320GB (5400 RPM) Drive in the 2010 Mac Mini.
Those of you that have actually done this, did you find that the Logic Board really needed to be shifted at all? I've been looking at the OWC installation Video and it would seem to me that the drive will lift out over the Logic Board without moving the board at all. It would mean that I would only have to detach the first SATA and two heat connectors. The least amount of connectors I have to pull the better I would assume. Also, I'm thinking that the black vinyl covering wrapped around the 320GB drive is there to protect the moving/electrical drive components on the bottom of the drive, which I would not need on the SSD. I know that I need/should replace the piece of tape to hold the heat sensor wire on the new SSD.
Any help would be great.....:)
2010 Mac Mini (2.4MHz - 8GB RAM Intel 80GB SSD(pending)) Air Port Extreme, 2TB Mini Stack External Dive, 16GB WiFi iPad, 32GB iPhone 3GS.
I have not done an SSD per say, but I have made a little side business upgrading the hard drive on 2010 Mac Mini's and selling them on ebay. After having done 10 or so of these, yes you do need to pull the logic board out slightly. The hard drive will not lift up enough to give you the angle you need clear the logic board with out pulling it out.
That said, only pull it out enough to see a small gap of air between the black beisl in the rear and the alum case.
WRT the heat sensors... I have found that the smallest amount of rubber cement works well if you you loose the adhesive when transferring the sensor. 8/10 times you will have plenty of stick left though and wont need to add any.
The black cover I have also assumed was there for air flow as well. If the SSD has a smooth surface, and no logic board to short, you probably can do away with it.
MrFusion
Apr 24, 12:28 PM
byteSizeOfElement is wrong. Your code will only work (if all other bugs are fixed) with 64 bit code, not with 32 bit code.
Care to explain why? :confused:
Having little faith in the user (mainly me) to actually release the pointer, I already decided to get the value by passing a reference.
-(void) element:(void *) element

graffiti alphabet styles

graffiti alphabet block style

Unique Graffiti Alphabet

How to Write the Graffiti Alphabet Style in Pencil

3D Graffiti Alphabet Dynamic

Graffiti Alphabet Style in

Bubble Style Graffiti alphabet

Colorful 3D Graffiti Alphabet

cool graffiti murals world

Feb , graffiti-alphabet-

Graffiti Alphabet wildstyle

Graffiti Alphabet Letters L

cool graffiti murals world

Graffiti Alphabets | Graffiti

graffiti alphabet styles.
Care to explain why? :confused:
Having little faith in the user (mainly me) to actually release the pointer, I already decided to get the value by passing a reference.
-(void) element:(void *) element
dstopsky
Dec 5, 05:34 AM
If it's not a Dreamweaver template (which I'm 99% sure it is) then it is simply a Macromedia.com rip-off (in terms of design).
Still, nicely done :)
Yes, you are right, it is a dreamweaver template. I'm working right now on a new layout but I wanted to get the site up and running again so I took the quick and easy route in the meantime. Either way, I think macromedia's design is a great starter.
Still, nicely done :)
Yes, you are right, it is a dreamweaver template. I'm working right now on a new layout but I wanted to get the site up and running again so I took the quick and easy route in the meantime. Either way, I think macromedia's design is a great starter.

gadgetmonster
Mar 5, 01:00 PM
greenpoison
likegadgets
May 5, 12:31 PM
get ready to wait awhile. I ordered a 27 imac the day they were available. shipping time is jun 15th arrive jun 22nd.
I see the big delay if the SSD option is ordered. In the meantime the 2010 i7 works well. I wonder why such a delay for SSD
I see the big delay if the SSD option is ordered. In the meantime the 2010 i7 works well. I wonder why such a delay for SSD

Ommid
Apr 23, 04:00 AM
taken from this (http://support.apple.com/kb/HT3641) support article:
With the iTunes Store, all sales are final. As soon as you click the
Buy button (using either 1-Click or the Shopping Cart) your purchases are charged
to the credit card on your Apple Account. You cannot cancel a purchase or receive
a refund for a purchase.
however, the iTS is known to make the occasional exception, so here's for hoping ...
I think this is shockingly bad service
With the iTunes Store, all sales are final. As soon as you click the
Buy button (using either 1-Click or the Shopping Cart) your purchases are charged
to the credit card on your Apple Account. You cannot cancel a purchase or receive
a refund for a purchase.
however, the iTS is known to make the occasional exception, so here's for hoping ...
I think this is shockingly bad service
SpitUK
May 6, 05:59 AM
I have noticed the speed improvement too. Subtle but just feels more solid and smoother if that make sense.

irmongoose
Aug 20, 04:51 PM
HAH! Talk about clich�d marketing skills! But damn does it work... you have my vote. :o
irmongoose
irmongoose
Intell
Oct 3, 11:21 PM
I think you can replace the TV Tuner board just by itself. I keep reading that "they where a popular add-on for Performa owners". This seems to suggest that the TV Tuner card in a Macintosh TV is the same used in Perfromas and other early Apple computers with TV Tuners.
Macmadant
Dec 6, 11:29 AM
I had the 400 iMac DV SE, and I just put in a 500MHz w/ a better grphx card (was on the 500mhz mobo) and it runs like a charm. Just get the mobo off eBay and there ya go! ;)
so you brought the 500mzh motherboard and just stuck it in, and it worked fine cool
;)
so you brought the 500mzh motherboard and just stuck it in, and it worked fine cool
;)
puckhead193
Mar 30, 04:45 PM
don't zoom in all the way.
If your using FCP you can use the smoothcam filter
If your using FCP you can use the smoothcam filter
cokirex
Nov 12, 03:39 PM
ha! i actually bought this cd off itunes a few months ago. could do with some more sequencing and layering. but what it is great for is sampling. i took one of the ink cartridge hitting the side of the caseing sounds and processed it into a kick drum. heres a rough mix.
http://www.riserock.com/mp3s/ocelot/ocelot_demo/aka_final.mp3
cory
http://www.riserock.com/mp3s/ocelot/ocelot_demo/aka_final.mp3
cory

Suture
Mar 28, 10:18 PM
Yeah, same one. It's a big download too.
macfan34
Feb 2, 09:50 PM
Every time I try to start the Terminal app I downloaded from Cydia, it crashes.
Ommid
Apr 25, 07:14 PM
If you order quickly you can try the following Superbiiz coupon code for 15% off, but it may have already expired.
RABBIT15
UK Shipping costs more than the ram :( lol
RABBIT15
UK Shipping costs more than the ram :( lol

narco
Oct 2, 07:37 PM
Good. Aladdin reminds me of all the early Mac OS's like 8.5 and 9 for some reason. They definitely needed an update.
.narco
.narco

iriejedi
Nov 4, 05:24 PM
I nealry lost a testicle when my wife saw the debit... but once she got to use the monitor a bit.... she was thrilled and acknowledge how much better it is then her 17 inch dell at work and praised me for making such a wise investment....
now if that does not demonstrate the quality of apple.... you should just go buy a dell!
The negative post on the new 23" on the Apple forum have slowed down and seem to be populated by a few who have uneven backlighting with yellow shading on the left.
bit
now if that does not demonstrate the quality of apple.... you should just go buy a dell!
The negative post on the new 23" on the Apple forum have slowed down and seem to be populated by a few who have uneven backlighting with yellow shading on the left.
bit
Shifty
Jan 21, 12:21 PM
It's still in beta testing, by the way.
The coolest freatures are the Weblog/Spydisk, and the shoutbox.
The coolest freatures are the Weblog/Spydisk, and the shoutbox.
harry*333
Jun 7, 07:07 AM
I was wondering what you were talking about wih colors so I whipped out my MacBook for the first time in weeks
Now I can see it, for some reason I couldn't see it on my iPad, all I see is a solid black shield and wings:p
By the way, your avatar( small one) is way over size
Now I can see it, for some reason I couldn't see it on my iPad, all I see is a solid black shield and wings:p
By the way, your avatar( small one) is way over size
philipma1957
Feb 15, 05:53 AM
What about if you put a SSD in the Mini? Would that make a difference for EyeTV (I guess probably not if you were using the RAM buffer)?
you got it no mini gpu has enough the older ones were 64mb then 256mb the imac has a 4870 = 512mb the mac pro has a 5870 = 1gb
It is frustrating to me as my ht is in a den and I don't have a lot of room in the rack for a big computer. I would have liked a mac midi the old foot print of 6.5 by 6.5 with 4 inches or 5 inches height.
you got it no mini gpu has enough the older ones were 64mb then 256mb the imac has a 4870 = 512mb the mac pro has a 5870 = 1gb
It is frustrating to me as my ht is in a den and I don't have a lot of room in the rack for a big computer. I would have liked a mac midi the old foot print of 6.5 by 6.5 with 4 inches or 5 inches height.
sidgriffey
Mar 16, 12:11 PM
I have a 2007 Macbook Pro Core 2 Duo 2.4GHz with a 40GB SSD that I boot snow leopard and apps from and a 160GB HDD that is in an optibay and stores my data/ holds my home folder (i.e., my superdrive is in an external enclosure).
If I want to install Lion, what is the best way for me to do this without losing my snow leopard setup? I have some 25GB left on the SSD last time I checked. Should I partition it? If I have a Mac Mini with snow leopard and all my stuff should I just install Lion clean over snow leopard on my MBP or is Lion too buggy?
Thanks.
If I want to install Lion, what is the best way for me to do this without losing my snow leopard setup? I have some 25GB left on the SSD last time I checked. Should I partition it? If I have a Mac Mini with snow leopard and all my stuff should I just install Lion clean over snow leopard on my MBP or is Lion too buggy?
Thanks.
Apple OC
Apr 17, 12:24 AM
use MRoogle to search for these answers ... you will get all your questions answered better than what a few responses will offer
also you will not regret switching to Mac
also you will not regret switching to Mac
No comments:
Post a Comment