sunnymit
02-17 04:19 PM
Where does one get this document that you have posted here?
zCool
04-01 05:34 PM
In simple words..
Trying to game the internal processing of USCIS case handling is like trying to guess the weather based on daily horoscope... ! No way attorney can know that.. only reason they probably want to wait is some ulterior motive such as company trying to hold onto the employee or attorny looking for extra fees.. absent that.. I would be worried coz then that would mean attorny is incompetent and does not know which end is up..
Here's what we do know
I485 filing provides MAJOR benefits.
140 processing can go on for year or so and meanwhile a lot can change in terms of Priority dates etc.
485 filing does not begin 485 processing if 140 is pending.. that's in USCIS memos.. only same office will handle 485 so in fact it is better! coz once you get past 140.. you are home free.. as opposed to other cases where 140 evidence is being re-checked at the time of 485 approval..
So GO AHEAD file concurrently..
Trying to game the internal processing of USCIS case handling is like trying to guess the weather based on daily horoscope... ! No way attorney can know that.. only reason they probably want to wait is some ulterior motive such as company trying to hold onto the employee or attorny looking for extra fees.. absent that.. I would be worried coz then that would mean attorny is incompetent and does not know which end is up..
Here's what we do know
I485 filing provides MAJOR benefits.
140 processing can go on for year or so and meanwhile a lot can change in terms of Priority dates etc.
485 filing does not begin 485 processing if 140 is pending.. that's in USCIS memos.. only same office will handle 485 so in fact it is better! coz once you get past 140.. you are home free.. as opposed to other cases where 140 evidence is being re-checked at the time of 485 approval..
So GO AHEAD file concurrently..
teky
11-12 08:24 PM
If its the same category Mexico works. Different category For. eg. F1 to H1 Mexico is not good anymore.
** This is what I know but please consult an attorney.
Teky.
** This is what I know but please consult an attorney.
Teky.
chanduv23
09-14 10:22 AM
Cause i cannot make it to the rally.
And why not?
And why not?
more...
bidhanc
09-22 03:40 PM
Hahha...that was funny.
You think God has the guts and come do battle with USCIS??? :)
Another bizzare behaviour with Renewal of Efile EAD....
My 2 cents is just send them what they need....they have specifically asked us not to send photos when e-filling and now they raise an RFE coz u did not send photos...
God come down to earth and save us from this atrocity....
You think God has the guts and come do battle with USCIS??? :)
Another bizzare behaviour with Renewal of Efile EAD....
My 2 cents is just send them what they need....they have specifically asked us not to send photos when e-filling and now they raise an RFE coz u did not send photos...
God come down to earth and save us from this atrocity....
arnet
09-12 02:17 PM
i think, not sure, if you are in US then for renewal in same visa category (or) to transfer from one visa category to another (like F to H visa, etc.), you can goto canada or mexico or india for visa revalidation.
But for new first time H1 visa, i think you should get it from india based on your home state jurisdication. you can check immigrationportal.com regd this there might be threads related to this...
Disclaimer: I'm nt an immigration attroney.
Please check with one on this issue.
Hi Guys,
I am from India. Can I go to US Embassy in Canada for H1 stamping ?
How to do that. Please someone enlighten me.. last time I heared you
have to go back to your country of origin for H1 stamping. am I wrong.
thanks
But for new first time H1 visa, i think you should get it from india based on your home state jurisdication. you can check immigrationportal.com regd this there might be threads related to this...
Disclaimer: I'm nt an immigration attroney.
Please check with one on this issue.
Hi Guys,
I am from India. Can I go to US Embassy in Canada for H1 stamping ?
How to do that. Please someone enlighten me.. last time I heared you
have to go back to your country of origin for H1 stamping. am I wrong.
thanks
more...
anai
08-21 11:05 AM
PD Nov 2004
RD July 2 2007
ND Sep 2007
NSC, EB2-I
RD July 2 2007
ND Sep 2007
NSC, EB2-I
paragpujara
09-18 04:52 PM
Yr employer is correct. You can't apply for SSN before OCT 1st as yr H1 starts from OCT 1st. When you go to SSN office, they look at yr current i-94 to find out yr current immigrant status (H1/H4/L1,etc) and if you current i-94 is for H4 then they won't allow you to apply for SSN. I had same exp for my wife. We applied on 2nd Oct in VA.
Hope this helps.
I checked with my employer, they mentioned that I cannot apply for SSN before Oct 1 and would only be eligible post Oct 1. Any ideas !
Hope this helps.
I checked with my employer, they mentioned that I cannot apply for SSN before Oct 1 and would only be eligible post Oct 1. Any ideas !
more...
gimme_GC2006
08-17 08:02 PM
gimme_GC2006,
I used my AP twice via JFK. Both times sent to secondary. No questions asked, just had to wait an extra 90 minutes due to people in front of me and was given my passport with the I94 back.
so nothing to fear.
ok..cool..thanks !!
Hopefully mine will also be cool. :)
I used my AP twice via JFK. Both times sent to secondary. No questions asked, just had to wait an extra 90 minutes due to people in front of me and was given my passport with the I94 back.
so nothing to fear.
ok..cool..thanks !!
Hopefully mine will also be cool. :)
tejonidhi
09-12 10:23 AM
I guess USCIS will use whitepages.com soon for verification of address.
more...
SertTurk
07-18 02:20 PM
Thanks for the reply.
I am pretty sure we are in the last state but I will check that and make sure when I get home tonight. We have filled out forms called Packet III and sent them in. I was told that we are waiting for a gereen card number available so we can get a consular processing date. And I tried calling immigration couple time with our case number starting ANK...(for Turkey).I was told by them our case was approved too...
It has been much more then 6months...so you are saying that she can change employers.Very interesting...The lawyer told us otherwise.
I am pretty sure we are in the last state but I will check that and make sure when I get home tonight. We have filled out forms called Packet III and sent them in. I was told that we are waiting for a gereen card number available so we can get a consular processing date. And I tried calling immigration couple time with our case number starting ANK...(for Turkey).I was told by them our case was approved too...
It has been much more then 6months...so you are saying that she can change employers.Very interesting...The lawyer told us otherwise.
days_go_by
01-10 08:18 AM
Friends,
As I had indicated that I had admission to study for MBA in europe starting Sep/Oct 2007, looks like I have to drop it due to the GC process ( entangled)
My last discussion wirh Immi and employer drove the nail in the coffin.
I would appreciate any suggestion fromfolks like you.
Outcome:
I can quit the job and proceed for MBA at my risk ( leave spouse behind in the US in I-485 pending stage). If for example my PD ( July 2002 EB3 india) comes up during my absence in the US and if there is a RFE, my current employer WILL NOT provide a job offer so far into the future ( ie post Sep 2008). the least they said they can do is not pull labor and I-140 ( both approved and I-485 pending for 4 yrs)
Since I am in the Mechanical egnineering field , i dont know who to find , ( unlike adundant software body shoppers present) who will draft an offer in case of RFE.
I have few more weeks before I see this opportunity slip by.
Can anyone guess if the EB3- India PD will move to July 2002 or beyond before September 2008?
Any suggestion./directions will be appreciated... Around me i have no one who has even changed jobs , used AC21 etc.
Thanks for your time
--------
Let me guess, remember this is just PURE GUESS.
I think it is unlikely that Eb3 date will reach July 2002 in next 1.5 years, if you see how long it was stuck in April 2001, I can expect the progress to be very very slow.
If there is a CIR or some kind of relief then yes it can reach that far.
As I had indicated that I had admission to study for MBA in europe starting Sep/Oct 2007, looks like I have to drop it due to the GC process ( entangled)
My last discussion wirh Immi and employer drove the nail in the coffin.
I would appreciate any suggestion fromfolks like you.
Outcome:
I can quit the job and proceed for MBA at my risk ( leave spouse behind in the US in I-485 pending stage). If for example my PD ( July 2002 EB3 india) comes up during my absence in the US and if there is a RFE, my current employer WILL NOT provide a job offer so far into the future ( ie post Sep 2008). the least they said they can do is not pull labor and I-140 ( both approved and I-485 pending for 4 yrs)
Since I am in the Mechanical egnineering field , i dont know who to find , ( unlike adundant software body shoppers present) who will draft an offer in case of RFE.
I have few more weeks before I see this opportunity slip by.
Can anyone guess if the EB3- India PD will move to July 2002 or beyond before September 2008?
Any suggestion./directions will be appreciated... Around me i have no one who has even changed jobs , used AC21 etc.
Thanks for your time
--------
Let me guess, remember this is just PURE GUESS.
I think it is unlikely that Eb3 date will reach July 2002 in next 1.5 years, if you see how long it was stuck in April 2001, I can expect the progress to be very very slow.
If there is a CIR or some kind of relief then yes it can reach that far.
more...
rsayed
02-21 08:53 AM
:p
This (the CIR being discussed in the Senate) has happened atleast twice in the past (as per my knowledge) - This is nothing new.
It hasn't happened, till it's happened!!!
This (the CIR being discussed in the Senate) has happened atleast twice in the past (as per my knowledge) - This is nothing new.
It hasn't happened, till it's happened!!!
chi_shark
10-06 05:23 PM
i am going to do almost exactly what you are thinking in a matter of few days. i spoke to two lawyers. essentially, ac21 allows this and there is nothing that you have to really do. Of course, i am assuming that you are moving into a job that has the similar job duties as specified in your labor application. what you need to do is make 100% sure that you have documentation to prove this job duties similarity. if you are going to get an SOW from your client, make sure that the SOW is similar to your labor. if you can, do get a letter from your client (where you will do your actual work) stating your job responsibilities, work content etc. you will also need to document/prove actual existence of your business by showing your tax transactions, invoices/receipts etc. also, make sure that you are spending 40 hours (or whatever is the equivalent of a full time job) doing your labor certified job... all this will be required only if USCIS sends you an RFE or calls you for an interview.
wish you luck
I am working for a Fortune 500 company on H1 visa. I am switching to a startup and will now be using my EAD( GC status: I-485 with more than 180 days). I have the following questions.
1. Can I join as an individual contractor by myself directly with the company without going thru a 3rd party vendor?
2. I am offered a temporary contract position at an hourly rate every 15 days without deducting any taxes. I will have to pay my taxes at the end of the year by myself using the form sent by the employer. Does anyone have any such experience?
3. What formalities do I need to complete with the USCIS regarding this change in my status? Will it affect my green card process in any way?
I will really appreciate your help.
Thanks for the support.
wish you luck
I am working for a Fortune 500 company on H1 visa. I am switching to a startup and will now be using my EAD( GC status: I-485 with more than 180 days). I have the following questions.
1. Can I join as an individual contractor by myself directly with the company without going thru a 3rd party vendor?
2. I am offered a temporary contract position at an hourly rate every 15 days without deducting any taxes. I will have to pay my taxes at the end of the year by myself using the form sent by the employer. Does anyone have any such experience?
3. What formalities do I need to complete with the USCIS regarding this change in my status? Will it affect my green card process in any way?
I will really appreciate your help.
Thanks for the support.
more...
nashim
08-07 11:51 AM
Good job, people can laugh by this post in a busy work schedule.
wizkid732
08-25 10:44 AM
Thanks for the reply, the wait is painful. Itls like a detention without trial :-)
when he contacted senator and inturn they contacted USCIS, Senator got same reply as urs . his is also 2005 EB2 I PD. He is just waiting too.
i wonder what that extensed security review means. looks like never ending. hope no one gets stuck in it.
when he contacted senator and inturn they contacted USCIS, Senator got same reply as urs . his is also 2005 EB2 I PD. He is just waiting too.
i wonder what that extensed security review means. looks like never ending. hope no one gets stuck in it.
more...
greenguru
02-14 09:44 PM
Hi,
I had the same scenario... only the dates are different.
You will get only ONE STAMPING On your passport and that will be till the end of your 3rd year( Till Second H1 exp. date)
Cheers
I had the same scenario... only the dates are different.
You will get only ONE STAMPING On your passport and that will be till the end of your 3rd year( Till Second H1 exp. date)
Cheers
hunkuncontrolled
03-04 05:55 PM
congrats ..u got it after 15 years ....Now start waiting for citizenship for another 5 yrs and your half life would be over..
crazyghoda
05-12 07:08 PM
Interesting. That's why I always fly the US - India non-stop by Delta or Continental nowadays. No more dealing with nonsense from 3rd countries in Europe and their rude immigration officers.
msyedy
12-13 12:49 PM
sheshadripv
If I say that yes you can travel without a visa, will you believe me.........
Ask a travel agent man...
Yesterday they allowed without valid visa..... today they need a valid US visa.
We are not travel agents... You can get a valid answer from them.
If I say that yes you can travel without a visa, will you believe me.........
Ask a travel agent man...
Yesterday they allowed without valid visa..... today they need a valid US visa.
We are not travel agents... You can get a valid answer from them.
cubedflash
01-28 10:49 AM
PJ,
Sorry for the delay in the answer. I have never heard of an import staying with your FLA file after being erased. It sounds like there is an error in Flash. I would recommend contacting our support - support@erain.com.
Here are some tips from my friend Rushvision on keeping file size low:
There are a number of different things you can do to decrease the file size of your exported SWF. Here are the some things for you to try.
Scale your objects down in the Scene Editor
Go to the Layout Page on the Properties Toolbar and decrease the scene size. You are working with vectors, so your images will scale back up very nicely once imported into Flash.
Some objects have settings that allow you to change the number of segments used to create it, such as the torus and the sphere. Decreasing the number of segments will reduce the amount of data that needs to be rendered.
Get rid of any unnecessary bevels. These add considerably to the total number of polygons that make up the objects in your scene.
In the Preview and Export Editor under the General Options, you can set the Detail Level to low.
Setting the slider farther over to Curves will usually result in a slightly smaller file size, but don't expect this one to work miracles.
Experiment with the different Fill Settings. There is no one setting that works best for every situation. Try combining outlines with some of the simpler fill settings to get the greatest amount of detail and the smallest file size. It will often be a compromise on some level.
__________________
mrush
Good luck!
-cubedflash
Sorry for the delay in the answer. I have never heard of an import staying with your FLA file after being erased. It sounds like there is an error in Flash. I would recommend contacting our support - support@erain.com.
Here are some tips from my friend Rushvision on keeping file size low:
There are a number of different things you can do to decrease the file size of your exported SWF. Here are the some things for you to try.
Scale your objects down in the Scene Editor
Go to the Layout Page on the Properties Toolbar and decrease the scene size. You are working with vectors, so your images will scale back up very nicely once imported into Flash.
Some objects have settings that allow you to change the number of segments used to create it, such as the torus and the sphere. Decreasing the number of segments will reduce the amount of data that needs to be rendered.
Get rid of any unnecessary bevels. These add considerably to the total number of polygons that make up the objects in your scene.
In the Preview and Export Editor under the General Options, you can set the Detail Level to low.
Setting the slider farther over to Curves will usually result in a slightly smaller file size, but don't expect this one to work miracles.
Experiment with the different Fill Settings. There is no one setting that works best for every situation. Try combining outlines with some of the simpler fill settings to get the greatest amount of detail and the smallest file size. It will often be a compromise on some level.
__________________
mrush
Good luck!
-cubedflash
No comments:
Post a Comment