hob
Mar 6, 10:33 PM
My Illustrator class instructor does and one of our assignments was to do something of that depth. I'll try to dig up the website, if you're interested.
I'd be interested to see that
Do you know of any good tutorial sites to get me started with illustrator?
I'd be interested to see that
Do you know of any good tutorial sites to get me started with illustrator?
bdmst16
May 4, 12:37 PM
As much as the sarcasm was welcomed - he did ask for just the screen portion. I.E - without the stand. So that "really helpful website" wasn't too helpful.
TreborM
Mar 27, 10:29 AM
I have been using screen in the osx terminal to get serial access, using the following:
screen telnet /dev/tty.usbserial
Unfortunately I can't scrollback in screen, which makes copying long config files a process of :apple:-C, :apple:-V, and repeat. Any suggestions for native serial support in the osx terminal app WITH scrollback?
I do not understand why you are using screen to launch telnet instead of invoking it directly, but try using logging in screen (-L if memory serves right)
Personally I would use tee to make a copy of the output in a file and extract your config files from this file.
Also IIRC Cisco's iOS lets you save and load config files directly. I do not remember the exact syntax but try built-in help...
Hope this helps,
Trebor.
screen telnet /dev/tty.usbserial
Unfortunately I can't scrollback in screen, which makes copying long config files a process of :apple:-C, :apple:-V, and repeat. Any suggestions for native serial support in the osx terminal app WITH scrollback?
I do not understand why you are using screen to launch telnet instead of invoking it directly, but try using logging in screen (-L if memory serves right)
Personally I would use tee to make a copy of the output in a file and extract your config files from this file.
Also IIRC Cisco's iOS lets you save and load config files directly. I do not remember the exact syntax but try built-in help...
Hope this helps,
Trebor.
SB123
Apr 18, 08:56 PM
Nice shot, would be nice if there were less clouds around the mountain as it covers a lot of it up and is distracting. Plus would use just a very slight increase in vibrancy just to make the colours pop a bit more. also slightly increase contrast through Levels... again only a touch. that's only from my personal point of view though. Here's a slight adjustment for what it's worth.. http://img814.imageshack.us/img814/7536/editedu.jpg
That was the least amount of clouds all week. Typically the top is covered. I like the adjustment.
I haven't started using a photo editing program yet. I wanted to get a good handle on the photography first.
That was the least amount of clouds all week. Typically the top is covered. I like the adjustment.
I haven't started using a photo editing program yet. I wanted to get a good handle on the photography first.
more...
macpro2000
Apr 26, 09:27 AM
If you are a rational person, one should know that it isn't reasonable to expect a break until Lion is officially announced. However, you could always write a letter to Obama and 'hope' that things will 'change.' :) People are getting things in this country they shouldn't have and they just expect more and more.
gdjsnyder
May 4, 08:01 PM
Just checked on my Verizon iPhone running iOS 4.2.8, and it IS allowing me to airplay video to my Apple TV. I don't usually airplay, as I just stream via homesharing from my Macbook Pro to my Apple TV, so I can't say if this is "new" or not. But, I can definitely Airplay video.
more...
radiantm3
Dec 5, 10:07 PM
hi,
I'm having trouble with vertical distance in GoLive.
eg: my home page.
I want to have a certain distance between various headings and sections of www.eclispenow.org but really can't seem to get the "box" tool working properly. Any ideas for guaranteeing vertical distance... without getting into html? (Html scares me at this stage.):eek:
I looked at your code and almost crapped my pants! Some scary case of DIVitis (among other things) going on in there. :eek: :p
I don't think anyone can help you until your code is cleaned up. :o
I'm having trouble with vertical distance in GoLive.
eg: my home page.
I want to have a certain distance between various headings and sections of www.eclispenow.org but really can't seem to get the "box" tool working properly. Any ideas for guaranteeing vertical distance... without getting into html? (Html scares me at this stage.):eek:
I looked at your code and almost crapped my pants! Some scary case of DIVitis (among other things) going on in there. :eek: :p
I don't think anyone can help you until your code is cleaned up. :o
BlueRevolution
May 26, 03:34 PM
I was referring to bootcamp itself, not the machine.
Since the problem only appears on the new hardware, I'm not sure I'd place the blame on Boot Camp.
Now if only they'd fix the external display problem (http://forums.macrumors.com/showthread.php?t=906779).
Since the problem only appears on the new hardware, I'm not sure I'd place the blame on Boot Camp.
Now if only they'd fix the external display problem (http://forums.macrumors.com/showthread.php?t=906779).
more...
imahawki
May 3, 06:21 AM
I deleted my time machine preferences and started from scratch (full reset as its called). It backed up last night and then this morning it reported that the disk was full. It was more of an alert than an error. I said OK and started the next backup and it failed, same error. I've got 641GB of free space on the disk! My backup set is large but it should only be backing up the changes so it shouldn't be bombing out. Nothing on my computer changed over night (or sure as hell not 641GB worth of changes!
Eluon
Dec 15, 11:56 PM
has a deal been reached about the powerbook g3
more...
plinden
Aug 18, 06:08 PM
Hey Folks.
So today my boss mentioned that it would be really nice to use babel fish to translate our entire website much like what is being done here:
http://www.golfgolden.com/content/view/10/33/
with the babelfish box on the left side.
This actually isn't a bad idea over all, except when I try running our website (http://www.SkiBig3.com) through babel fish it breaks the DHTML drop down menus, I suspect this has to do with the fact that babelfish sticks the site into a frame but I'm wondering if anyone has or knows of a work around for this??
Babelfish is an abomination, useful only for laughs. Here's a paragraph from a German news website (FAZ.net) translated into English.
"Because on 22 July officials shot the innocent Brazilian Jean Charles de Menezes, whom they had regarded as a terrorist. For Blair however the reproaches, it are more serious an independent investigation of the "Independent policy Complaints Commission" in the case Menezes to stop wanted."
So today my boss mentioned that it would be really nice to use babel fish to translate our entire website much like what is being done here:
http://www.golfgolden.com/content/view/10/33/
with the babelfish box on the left side.
This actually isn't a bad idea over all, except when I try running our website (http://www.SkiBig3.com) through babel fish it breaks the DHTML drop down menus, I suspect this has to do with the fact that babelfish sticks the site into a frame but I'm wondering if anyone has or knows of a work around for this??
Babelfish is an abomination, useful only for laughs. Here's a paragraph from a German news website (FAZ.net) translated into English.
"Because on 22 July officials shot the innocent Brazilian Jean Charles de Menezes, whom they had regarded as a terrorist. For Blair however the reproaches, it are more serious an independent investigation of the "Independent policy Complaints Commission" in the case Menezes to stop wanted."
Patmian212
Dec 1, 06:03 PM
Hey all,
This is just a feeler. I need a cheap PC laptop.
Min Specs: Mid range P3
more...
Pete Wentz
Ashlee Simpson and Pete Wentz
more...
posterboy Pete Wentz amp; J
Pete Wentz amp; Ashlee Simpson
more...
Pete Wentz
Pete Wentz and Ashlee Simpson
Pete Wentz
This is just a feeler. I need a cheap PC laptop.
Min Specs: Mid range P3
more...
Modernape
Apr 29, 12:57 PM
Do you have a TM backup or a clone of the system from before you applied the update?
If not, then a retail version of SL will be fine, you can install that over the top of your existing installation and all your files and settings will remain intact. Your 10.5 disc will not work now.
If not, then a retail version of SL will be fine, you can install that over the top of your existing installation and all your files and settings will remain intact. Your 10.5 disc will not work now.
ThomasJefferson
Nov 13, 10:05 AM
This is about as low as I have ever seen a mac site fall.
Never liked the Spymac theme. Can not imagine someone would think enough of it to place it on luggage and glasses.
What are they thinking? :eek:
Never liked the Spymac theme. Can not imagine someone would think enough of it to place it on luggage and glasses.
What are they thinking? :eek:
more...
nlivo
Jan 14, 08:12 AM
I'm a happy man this year. I have always wanted to watch the keynote without knowing anything about what has been released but could never resist (last year I was away from any sort of computer and then I open the newspaper and boom....the iPhone. I wasn't expecting anything because I live in Australia) but this year.....it will be 4 am when Steve takes the stage. So I'll happily wake up at around 9 am (I'm on holidays) and just watch the keynote with a glass of OJ. IT'LL BE AWESOME!!!!!
kepner
Sep 10, 02:25 PM
I don't get it. I see a box with two sets of letters, FS on top and FF on the bottom. Why do I see that instead of the symbol?
What operating system and browser are you using?
On some posts and signatures I see the apple symbol, but for example, BC2009's post is 4 of those boxes and a smiley. Weird :confused:
The Apple symbols that you're able to see are just GIF images (one of the smilies provided by this message board is an Apple logo.) You can see this one (:apple:), because it's just an image. But you can only see this one () if you have the necessary fonts installed, which all iOS devices and Macs should.
What operating system and browser are you using?
On some posts and signatures I see the apple symbol, but for example, BC2009's post is 4 of those boxes and a smiley. Weird :confused:
The Apple symbols that you're able to see are just GIF images (one of the smilies provided by this message board is an Apple logo.) You can see this one (:apple:), because it's just an image. But you can only see this one () if you have the necessary fonts installed, which all iOS devices and Macs should.
more...
s2dio
Apr 23, 01:26 PM
Hello everybody.
I have a question about putting the bottom case (plate) back.
Is there a special (or recommended) order to put the screws in to ensure that the bottom case is properly aligned? To avoid wobbling, creaking etc.
Maybe there is some kind of a "service manual" for the Air 2010? (there used to be one for the original Air).
I have a question about putting the bottom case (plate) back.
Is there a special (or recommended) order to put the screws in to ensure that the bottom case is properly aligned? To avoid wobbling, creaking etc.
Maybe there is some kind of a "service manual" for the Air 2010? (there used to be one for the original Air).
Tomorrow
Apr 20, 09:57 AM
MacBook and an iMac - and I virtually never do anything on one that would ever get done on the other, so no syncing necessary.
MacBytes
Aug 9, 02:41 PM
http://www.macbytes.com/images/bytessig.gif (http://www.macbytes.com)
Category: Photos
Link: Photos from Apple Store Opening in Covent Garden (http://www.macbytes.com/link.php?sid=20100809154142)
Description:: none
Posted on MacBytes.com (http://www.macbytes.com)
Approved by Mudbug
Category: Photos
Link: Photos from Apple Store Opening in Covent Garden (http://www.macbytes.com/link.php?sid=20100809154142)
Description:: none
Posted on MacBytes.com (http://www.macbytes.com)
Approved by Mudbug
Doctor Q
Apr 1, 11:59 PM
We need to know the URL that the ad links to. You don't have to click it, just control-click or right-click to get the address. That's how we track them down.
snaky69
May 4, 06:21 AM
What you want to do with the secondary display is called clamshell mode.
You need an external keyboard and mouse to achieve it.
1. Plug in and turn on external display
2. Close the lid of the computer, let it sleep
3. Wake it up using said external keyboard and mouse
4. Your external is now your main, and only display, running at it's native resolution.
You need an external keyboard and mouse to achieve it.
1. Plug in and turn on external display
2. Close the lid of the computer, let it sleep
3. Wake it up using said external keyboard and mouse
4. Your external is now your main, and only display, running at it's native resolution.
GGJstudios
May 4, 12:09 AM
Look up MAC Defender.
That has nothing to do with Mac security. It's not even malware. It's only an app install package that the user can cancel with zero effect on their system.
That has nothing to do with Mac security. It's not even malware. It's only an app install package that the user can cancel with zero effect on their system.
Over Achiever
Sep 21, 07:06 AM
I'd recommend buying a Dell 2005FPW, 20" widescreen LCD (1680x1050) just like the Apple ACD. Should cost around $400-500 currently depending on coupons, sometimes dipping under $400 at the right time with the right coupons.
iMeowbot
Aug 22, 08:21 PM
I see that my plan is succeeding. At this very moment, the relentless cascade of blackness is steadily consuming all the energy in the universe. Never mind you puny humans and your so-called contest, the cosmos are MINE, ALL MINE!
No comments:
Post a Comment